Pack of 10 Recessed GU5.3 MR16 Fitting Frost White Ceiling Downlight Fitting

Product Information

Beam Angle: Standard Optics: 30.9°, Medium Filter: 40.4°, Medium Filter With Honeycomb: 33.6°, Wide Filter: 41.8°, Wide Filter With Honeycomb: 34.2°

Brought to you by Mirrorstone Lighting, you can find a huge selection of GU10 downlights, fitted LED downlights and MR16 downlights amongst others. If you're trying to change your bulbs, there are three features to consider before buying a new downlight fixture . If you’re changing from one LED lightbulb to another, you may have fewer problems because they emit less heat.Downlights generate a lot of heat during operation, making them hot after use. They are so hot that they can cause a first-degree burn. It is therefore advised to wait until the bulb is cool. If you find a range of numbers, say, for example, 30-50VA. The 30 is the minimum load rating, while the 50 is the maximum load rating. The total power consumption of your new bulb must be within this range. Looking for a downlight that can tilt and be flexible? Our 7W Fitted LED Downlight 600 Lumens Standard Tilt gives you this freedom. Iluminance: Standard Optics: 29 lux @ 5 m, Medium Filter: 11 lux @ 5 m, Medium Filter With Honeycomb: 9 lux @ 5 m, Wide Filter: 8 lux @ 5 m, Wide Filter With Honeycomb: 8 lux @ 5 m Not only this, but they have incredibly long lifespans (about 50,000 hours i.e 11-year lifespan) whilst being very easy to maintain.

Our MR16 Downlights are available in 4 finishes: white, chrome, satin and brass. Satin is by far the most popular option with our customers. The best way to describe satin is as a non-reflective chrome. This finish complements most interiors. More people are deciding to implement LED downlights in their homes. This is due to the fact that they are energy efficient. They conserve energy and can produce more light compared to halogen counterparts. Lumens: Standard Optics: 266, Medium Filter: 194, Medium Filter With Honeycomb: 98.3, Wide Filter: 182, Wide Filter With Honeycomb: 83.1

Best Dimmer Switches

MR16 bulbs usually use 5-6watts of power, which is below the minimum load of a transformer so you would most likely have no problems. MR16 downlights are a type of light fitting that take an MR16 bulb and shine their light in a predominantly downward direction. The benefit of this type of light fitting is that they are designed to recess into your ceiling and sit flush with the ceiling. The result is a very subtle lighting system and increased ambience.

You may also need to know what type of bulb is required whilst additionally evaluating the brightness of the lighting. If it is a definite number, assume it is your maximum rating and don't install a bulb with higher consumption. Afterwards, you need to use a screwdriver to loosen all the screws holding the fitting in place. Using the wires as a guide, locate the transformer (it is usually above the light fitting). You can also find it in your attic.You also have the option of fixed and tilt downlights. Our tilt option is particularly popular with customers as it allows them to angle their bulbs and control the position of the light creating feature lighting effects.